Car bearing the installation and maintenance of common sense

auto bearing the installation, maintenance and use common sense

     General Motors and the mechanical bearing is an important difference is that the car bearing in the mobile environment, it forces the situation and working conditions more complex and at the same time as a vehicle to catch into a very sophisticated machinery parts, the right to install and use, Lubrication and maintenance for the realization of the basic functions of the catch as crucial.

     Bearing the installation and dismantling

     Use clean gasoline or kerosene will be matched with bearings and related parts to clean;

     Ready to check the use of the bearings in line with the original model, which matched the size of the parts is qualified;

     Using special tools for assembly into the sleeve to pressure bearing, tool diameter sleeve bearing no more than the outer wall, when the assembly to force uniform, not the impact of the barbaric and assembly;

     automotive Bearing or wheell bearings installed after turning bearings and related components to see if there is the phenomenon of stagnation card and abnormal noise;

     In accordance with the requirements of the host components into the designated grease or lubricants;

     In the large-scale assembly and the shaft bearings and bearings, the hole between the large amount of surplus products bearing on the need for heating oil bath, oil temperature around 80 degrees Celsius;

     Bearing demolition, it is important to use the pull-out type of special tools, is strictly prohibited to use a direct hit iron bearings;

     ball bearings or wind generators assembly and dismantling, should be avoided so that the body roll and maintain the aircraft by force or deformation.